top of page

HOW IT WORKS THE 4 STAGE PROCESS

The jetpatcher now coats the bottom and the perimetral area of the pothole with cationic rapid setting emulsion, sealing the entire area, preventing further damage cause from penetration of the humidity, which it is the reason of the erosion of the asphalt, sealing the micro-fissures around and inside the area to repair.

The aggregate (crusser of 1/4 diameter) flow inside the current of emulsion having a perfect cover and it is blow into the pothole at high speed.

The final stage on the Jetpatcher process.  After the pothole has been effectively sealed and filled, a light layer of dry aggregate is applied to the patch, preventing the patch from adhering to car tires prior to the emulsion fully curing.  The patch is now ready for traffic.

1

2

3

4

When the mix (aggregate plus emulsion) reach the level of the road, then it is covered by a new layer of emulsion, to seal and waterproof the repair.

5

Screenshot_20190122-123950.jpg
Screenshot_20190122-123739.jpg
Screenshot_20190122-123510.jpg
Screenshot_20190122-123519.jpg
Screenshot_20190122-123527.jpg

JETPATCHER 5 STEP PROCESS

Using the high volume blower  the Jetpatcher easily blows all loose debris & moisture from the pothole, cleaning it and preparing the hole for an effective patch.

bottom of page